This is netcat.info, produced by makeinfo version 4.3 from netcat.texi.

INFO-DIR-SECTION Net Utilities
START-INFO-DIR-ENTRY
* Netcat: (netcat).     The GNU famous networking tool.
END-INFO-DIR-ENTRY

   This file documents the Netcat utility for network operations data.

   Copyright (C) 2002 - 2004  Giovanni Giacobbi

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "GNU General Public License" and "GNU Free
Documentation License", with no Front-Cover Texts, and with no
Back-Cover Texts.  A copy of the license is included in the section
entitled "GNU Free Documentation License".


File: netcat.info,  Node: Top,  Next: Overview,  Prev: (dir),  Up: (dir)

Netcat 0.7.1
************

   This manual documents version 0.7.1 of GNU Netcat, the freely
available utility for network connections.

   Copyright (C) 1996, 1997, 1998, 2000, 2001 Free Software Foundation,
Inc.

* Menu:

* Overview::            Features of netcat.
* Invoking::            Netcat command-line arguments.
* The Connect Mode::    Using netcat in the connect mode.
* The Listen Mode::     Using netcat in the listen mode.
* The Tunnel Mode::     Using netcat in the tunnel mode.
* Examples::            Examples of usage.


File: netcat.info,  Node: Overview,  Next: Invoking,  Prev: Top,  Up: Top

Overview
********

   Netcat is a simple Unix utility which reads and writes data across
network connections, using TCP or UDP protocol.  It is designed to be a
reliable "back-end" tool that can be used directly or easily driven by
other programs and scripts.  At the same time, it is a feature-rich
network debugging and exploration tool, since it can create almost any
kind of connection you would need and has several interesting built-in
capabilities.  Netcat, or "nc" as the original program was named,
should have been supplied long ago as another one of those cryptic but
standard Unix tools.


File: netcat.info,  Node: Invoking,  Next: The Connect Mode,  Prev: Overview,  Up: Top

Invoking
********

   Netcat has three main modes of functionality.  These are the connect
mode, the listen mode, and the tunnel mode.

   The most common mode is the connect mode, which for example allows
the output of a locally called command to be redirected for example to
a remote netcat listening or to any other kind of daemon waiting for a
connection.

   On the other hand, the listen mode can be used to obtain some kind
of stream of data from a remote site.

   The most new feature is the tunnel mode, which is a powerful and
reliable mode that allows tunneling a remote site towards any other
remote site, allowing to specify for example from which interface
create the connection and from which port.

* Menu:

* Basic Startup Options::
* Protocol and Interface Options::
* Advanced Options::


File: netcat.info,  Node: Basic Startup Options,  Next: Protocol and Interface Options,  Prev: Invoking,  Up: Invoking

Basic Startup Options
=====================

`-V'
`--version'
     Display the version of netcat and exit.

`-h'
`--help'
     Print a help message describing most common netcat's command-line
     switches and a short description.

`-v'
`--verbose'
     Prints status messages, usually needed for using netcat as user
     front-end.  All messages are printed to stderr in order not to
     affect the data stream.

     Use this option double to get more messages.


File: netcat.info,  Node: Protocol and Interface Options,  Next: Advanced Options,  Prev: Basic Startup Options,  Up: Invoking

Protocol and Interface Options
==============================

`-t'
`--tcp'
     Selects the TCP protocol, this is the default.  It may be useful
     (see Tunnel Mode) to specify this option after for example the UDP
     option in order to allow a cross-protocol bridge between TCP and
     UDP.

`-u'
`--udp'
     Selects the UDP protocol.  See the -tcp option.

`-p NUM'
`--local-port=NUM'
     Selects the local port.  In listen and tunnel mode, it specifies
     which port to use for listening, while in connect mode it
     specifies the source port (the port from which originating the
     connection).

     If this option is not specified, the OS will assign a random
     available port.

`-s ADDRESS'
`--source=ADDRESS'
     Specifies the source address used for creating sockets.  In listen
     mode and tunnel mode this switch specifies the bound address, and
     it is generally a good idea not to specify this, which causes
     netcat to bind to a generic interface.  In the connect mode, this
     switch is used to specify the source address for connecting to the
     outside world.  Again, if it's not specified a proper address for
     the destination route will be used.

`-P NUM'
`--tunnel-port=NUM'
     Same as -port, but affects only the connect phase (thus this
     option has no effect in listen mode).  This switch is useful in
     tunnel mode for specifying the source port for the connecting
     socket.

`-S ADDRESS'
`--tunnel-source=ADDRESS'
     Same as -source, but affects only the connect phase (thus this has
     no effects in listen mode).  This switch is useful in tunnel mode
     for specifying the source address for the connecting socket.


File: netcat.info,  Node: Advanced Options,  Prev: Protocol and Interface Options,  Up: Invoking

Advanced Options
================

`-i SECS'
`--interval SECS'
     sets the buffering output delay time.  This affects all the
     current modes and makes the connection sock to buffer outgoing
     data.  This means that in tunnel mode everything received from the
     listening socket is buffered for the connect socket.

`-n'
`--dont-resolve'
     Don't do DNS lookups on any of the specified addresses or
     hostnames, or names of port numbers from /etc/services.

`-r'
`--randomize'
     Randomizes the target remote ports ranges.  If more than one range
     is specified it will randomize the ports in the whole global range.

`-w'
`--wait=SECS'
     Specifies the starting inactivity delay after which netcat will
     exit with an error status.  In connect mode and in tunnel mode
     this specifies the timeout for the connecting socket, while in
     listen mode it specifies the time to wait for a VALID incoming
     connection (see listen mode).

`-T'
`--telnet'
     Answers the telnet codes as described in RFC0854.  This makes
     possible to use netcat to script telnet sessions.  The incoming
     telnet codes are parsed inside the receiving queue and are
     stripped off before forwarding the data as they were never
     received, so the application doesn't have to parse the codes
     itself (this behaviour can be disabled at compile time with
     -enable-oldtelnet or with -enable-compat).

`-z'
`--zero'
     Sets the zero I/O flag for the selected mode.  In connect mode it
     means that as soon as the port is open it is immediately shutdown
     and closed.  This may be useful for probing or scanning (even if
     there are faster portscanners out there, but this may be useful
     for scripting purposes).  In listen mode, it makes netcat refusing
     all the incoming connections thus running in timeout (if set), or
     waiting forever.  In both cases, no data is transfered.

     This option is incompatible with the tunnel mode.


File: netcat.info,  Node: The Connect Mode,  Next: The Listen Mode,  Prev: Invoking,  Up: Top

The Connect Mode
****************

   In the connect mode, netcat connects to a remote host and simply
links his stdin and stdout to the remote data stream.

   Basic usage is:

   netcat [options] hostname ports ...

   The specified ports indicates actually all ports to connect to.  With
normal operations netcat will sequentially (or randomly, if you
specified the `-r' option) connect to all the specified ports and links
stdin/stdout.  No more than one port is used at once.

   Particular options: In this mode, the `-p' option specifies the
source port for connection, but it should never be specified unless you
know what you are doing. The `-w' (timeout) option specifies how long
to wait for the connection to succeed (if the remote host connects but
doesn't send any data, the timeout DOESN'T apply).


File: netcat.info,  Node: The Listen Mode,  Next: The Tunnel Mode,  Prev: The Connect Mode,  Up: Top

The Listen Mode
***************

   In listen mode, netcat stays idle listening on a port, specified by
the `-p' switch, until some remote host connects. At this point, the
basic behaviour is the same of the connect mode.

   Basic usage is:

   netcat -l -p port [remote_hostname] [remote_ports] ...

   The remote hostname specifies which host is allowed to connect and
from which ports. Usually these parameters are not specified, but if
you want to sort out a special connection.


File: netcat.info,  Node: The Tunnel Mode,  Next: Examples,  Prev: The Listen Mode,  Up: Top

The Tunnel Mode
***************

   The tunnel mode ...


File: netcat.info,  Node: Examples,  Prev: The Tunnel Mode,  Up: Top

Examples
********

   under writing ...

   netcat [options] hostname port [port] ...

   netcat -l -p port [options] [hostname] [port] ...

   netcat -L hostname:port -p port [options] ...



Tag Table:
Node: Top944
Node: Overview1558
Node: Invoking2236
Node: Basic Startup Options3134
Node: Protocol and Interface Options3724
Node: Advanced Options5548
Node: The Connect Mode7631
Node: The Listen Mode8542
Node: The Tunnel Mode9131
Node: Examples9284

End Tag Table
