# Debugging schemes and strategies

The latest version of this document is always available at http://gcc.gnu.org/onlinedocs/libstdc++/debug.html.

To the libstdc++-v3 homepage.

There are numerous things that can be done to improve the ease with which C++ binaries are debugged when using the GNU tool chain. Here are some of them.

### Compiler flags determine debug info

The default optimizations and debug flags for a libstdc++ build are `-g -O2`. However, both debug and optimization flags can be varied to change debugging characteristics. For instance, turning off all optimization via the `-g -O0` flag will disable inlining, so that stepping through all functions, including inlined constructors and destructors, is possible. In addition, `-fno-eliminate-unused-debug-types` can be used when additional debug information, such as nested class info, is desired.

Or, the debug format that the compiler and debugger use to communicate information about source constructs can be changed via `-gdwarf-2` or `-gstabs` flags: some debugging formats permit more expressive type and scope information to be shown in gdb. The default debug information for a particular platform can be identified via the value set by the PREFERRED_DEBUGGING_TYPE macro in the gcc sources.

Many other options are available: please see "Options for Debugging Your Program" in Using the GNU Compiler Collection (GCC) for a complete list.

### Using special flags to make a debug binary

If you would like debug symbols in libstdc++, there are two ways to build libstdc++ with debug flags. The first is to run make from the toplevel in a freshly-configured tree with

         --enable-libstdcxx-debug

and perhaps

         --enable-libstdcxx-debug-flags='...'

to create a separate debug build. Both the normal build and the debug build will persist, without having to specify `CXXFLAGS`, and the debug library will be installed in a separate directory tree, in `(prefix)/lib/debug`. For more information, look at the configuration options document.

A second approach is to use the configuration flags

         make CXXFLAGS='-g3 -O0' all

This quick and dirty approach is often sufficient for quick debugging tasks, when you cannot or don't want to recompile your application to use the debug mode.

### The libstdc++ debug mode

By default, libstdc++ is built with efficiency in mind, and therefore performs little or no error checking that is not required by the C++ standard. This means that programs that incorrectly use the C++ standard library will exhibit behavior that is not portable and may not even be predictable, because they tread into implementation-specific or undefined behavior. To detect some of these errors before they can become problematic, libstdc++ offers a debug mode that provides additional checking of library facilities, and will report errors in the use of libstdc++ as soon as they can be detected by emitting a description of the problem to standard error and aborting the program. This debug mode is available with GCC 3.4.0 and later versions.

The libstdc++ debug mode performs checking for many areas of the C++ standard, but the focus is on checking interactions among standard iterators, containers, and algorithms, including:

- Safe iterators: Iterators keep track of the container whose elements they reference, so errors such as incrementing a past-the-end iterator or dereferencing an iterator that points to a container that has been destructed are diagnosed immediately.
- Algorithm preconditions: Algorithms attempt to validate their input parameters to detect errors as early as possible. For instance, the `set_intersection` algorithm requires that its iterator parameters `first1` and `last1` form a valid iterator range, and that the sequence [`first1`, `last1`) is sorted according to the same predicate that was passed to `set_intersection`; the libstdc++ debug mode will detect an error if the sequence is not sorted or was sorted by a different predicate.

#### Using the libstdc++ debug mode

To use the libstdc++ debug mode, compile your application with the compiler flag `-D_GLIBCXX_DEBUG`. Note that this flag changes the sizes and behavior of standard class templates such as `std::vector`, and therefore you can only link code compiled with debug mode and code compiled without debug mode if no instantiation of a container is passed between the two translation units.

For information about the design of the libstdc++ debug mode, please see the libstdc++ debug mode design document.

#### Using the debugging containers without debug mode

When it is not feasible to recompile your entire application, or only specific containers need checking, debugging containers are available as GNU extensions. These debugging containers are functionally equivalent to the standard drop-in containers used in debug mode, but they are available in a separate namespace as GNU extensions and may be used in programs compiled with either release mode or with debug mode. The following table provides the names and headers of the debugging containers:

Container | Header | Debug container | Debug header
--- | --- | --- | ---
std::bitset | <bitset> | __gnu_debug::bitset | <debug/bitset>
std::deque | <deque> | __gnu_debug::deque | <debug/deque>
std::list | <list> | __gnu_debug::list | <debug/list>
std::map | <map> | __gnu_debug::map | <debug/map>
std::multimap | <map> | __gnu_debug::multimap | <debug/map>
std::multiset | <set> | __gnu_debug::multiset | <debug/set>
std::set | <set> | __gnu_debug::set | <debug/set>
std::string | <string> | __gnu_debug::string | <debug/string>
std::wstring | <string> | __gnu_debug::wstring | <debug/string>
std::basic_string | <string> | __gnu_debug::basic_string | <debug/string>
std::vector | <vector> | __gnu_debug::vector | <debug/vector>
__gnu_cxx::hash_map | <ext/hash_map> | __gnu_debug::hash_map | <debug/hash_map>
__gnu_cxx::hash_multimap | <ext/hash_map> | __gnu_debug::hash_multimap | <debug/hash_map>
__gnu_cxx::hash_set | <ext/hash_set> | __gnu_debug::hash_set | <debug/hash_set>
__gnu_cxx::hash_multiset | <ext/hash_set> | __gnu_debug::hash_multiset | <debug/hash_set>

#### Debug mode semantics

A program that uses the C++ standard library correctly will maintain the same semantics under debug mode as it had with the normal (release) library. All functional and exception-handling guarantees made by the normal library also hold for the debug mode library, with one exception: performance guarantees made by the normal library may not hold in the debug mode library. For instance, erasing an element in a `std::list` is a constant-time operation in normal library, but in debug mode it is linear in the number of iterators that reference that particular list. So while your (correct) program won't change its results, it is likely to execute more slowly.

libstdc++ includes many extensions to the C++ standard library. In some cases the extensions are obvious, such as the hashed associative containers, whereas other extensions give predictable results to behavior that would otherwise be undefined, such as throwing an exception when a `std::basic_string` is constructed from a NULL character pointer. This latter category also includes implementation-defined and unspecified semantics, such as the growth rate of a vector. Use of these extensions is not considered incorrect, so code that relies on them will not be rejected by debug mode. However, use of these extensions may affect the portability of code to other implementations of the C++ standard library, and is therefore somewhat hazardous. For this reason, the libstdc++ debug mode offers a "pedantic" mode (similar to GCC's `-pedantic` compiler flag) that attempts to emulate the semantics guaranteed by the C++ standard. For instance, constructing a `std::basic_string` with a NULL character pointer would result in an exception under normal mode or non-pedantic debug mode (this is a libstdc++ extension), whereas under pedantic debug mode libstdc++ would signal an error. To enable the pedantic debug mode, compile your program with both `-D_GLIBCXX_DEBUG` and `-D_GLIBCXX_DEBUG_PEDANTIC` .

The following library components provide extra debugging capabilities in debug mode:

- `std::basic_string` (no safe iterators)
- `std::bitset`
- `std::deque`
- `__gnu_cxx::hash_map`
- `__gnu_cxx::hash_multimap`
- `__gnu_cxx::hash_multiset`
- `__gnu_cxx::hash_set`
- `std::list`
- `std::map`
- `std::multimap`
- `std::multiset`
- `std::set`
- `std::vector`

### Tips for memory leak hunting

There are various third party memory tracing and debug utilities that can be used to provide detailed memory allocation information about C++ code. An exhaustive list of tools is not going to be attempted, but includes `mtrace`, `valgrind`, `mudflap`, and the non-free commercial product `purify`. In addition, `libcwd` has a replacement for the global new and delete operators that can track memory allocation and deallocation and provide useful memory statistics.

Regardless of the memory debugging tool being used, there is one thing of great importance to keep in mind when debugging C++ code that uses `new` and `delete`: there are different kinds of allocation schemes that can be used by `std::allocator` . For implementation details, see this document and look specifically for `GLIBCXX_FORCE_NEW`.

In a nutshell, the default allocator used by `std::allocator` is a high-performance pool allocator, and can give the mistaken impression that in a suspect executable, memory is being leaked, when in reality the memory "leak" is a pool being used by the library's allocator and is reclaimed after program termination.

For valgrind, there are some specific items to keep in mind. First of all, use a version of valgrind that will work with current GNU C++ tools: the first that can do this is valgrind 1.0.4, but later versions should work at least as well. Second of all, use a completely unoptimized build to avoid confusing valgrind. Third, use GLIBCXX_FORCE_NEW to keep extraneous pool allocation noise from cluttering debug information.

Fourth, it may be necessary to force deallocation in other libraries as well, namely the "C" library. On linux, this can be accomplished with the appropriate use of the `__cxa_atexit` or `atexit` functions.

       #include <cstdlib>

       extern "C" void __libc_freeres(void);

       void do_something() { }

       int main()
       {
         atexit(__libc_freeres);
         do_something();
         return 0;
       }

or, using `__cxa_atexit`:

       extern "C" void __libc_freeres(void);
       extern "C" int __cxa_atexit(void (*func) (void *), void *arg, void *d);

       void do_something() { }

       int main()
       {
          extern void* __dso_handle __attribute__ ((__weak__));
          __cxa_atexit((void (*) (void *)) __libc_freeres, NULL,
                       &__dso_handle ? __dso_handle : NULL);
          do_test();
          return 0;
       }

Suggested valgrind flags, given the suggestions above about setting up the runtime environment, library, and test file, might be:

       valgrind -v --num-callers=20 --leak-check=yes --leak-resolution=high --show-reachable=yes a.out

### Some gdb strategies

Many options are available for gdb itself: please see "GDB features for C++" in the gdb documentation. Also recommended: the other parts of this manual.

These settings can either be switched on in at the gdb command line, or put into a .gdbint file to establish default debugging characteristics, like so:

       set print pretty on
       set print object on
       set print static-members on
       set print vtbl on
       set print demangle on
       set demangle-style gnu-v3

### Tracking uncaught exceptions

The verbose termination handler gives information about uncaught exceptions which are killing the program. It is described in the linked-to page.

Return to the top of the page or to the libstdc++ homepage.

See license.html for copying conditions. Comments and suggestions are welcome, and may be sent to the libstdc++ mailing list.